Cangzhou Yuchi Auto Parts Co., LTD
+86-13832705650,+86-15227502601
Common faults and maintenance points of gearbox
Release time:
2025-12-04
Common faults: gear jerking, oil leakage, abnormal noise, gear failure, often caused by gear wear, aging clutch plates, hydraulic oil deterioration, etc.
Common faults: gear jerking, oil leakage, abnormal noise, gear failure, often caused by gear wear, aging clutch plates, hydraulic oil deterioration, etc.
Maintenance key: Regularly replace transmission oil (according to the equipment manual cycle), check for leaks in seals, and avoid overloading operation.
Keyword:
Related News
Can different types of automotive transmission fluids be mixed?
Mismatch of friction coefficient leads to transmission failure: Different gearboxes have significantly different requirements for oil friction coefficient. For example, CVT gearbox relies on steel strip and cone wheel friction transmission, requiring specialized oil with low friction coefficient to prevent slipping; The AT gearbox relies on a hydraulic torque converter and clutch to operate, requiring a medium friction coefficient to ensure power transmission. If AT oil is added to the CVT gearbox, it will cause severe wear of the steel strip due to high friction coefficient; On the contrary, adding CVT oil to the AT gearbox may cause clutch slippage and poor power transmission.
2025-12-04
What should be noted when checking and replacing the gearbox oil in a car?
The premise of inspection should be accurate： Oil temperature requirement: Most automatic transmissions (AT/DCT/CVT) need to heat the oil to 40 ℃ -60 ℃ (idle for 5-10 minutes without turning off the engine), at which point the oil is at normal working viscosity and the liquid level measurement is most accurate; The manual gearbox can be inspected for cold driving.
2025-12-04
What are the symptoms of insufficient transmission oil in a car?
Transmission oil is the medium for power transmission and gear shifting execution. Insufficient oil can lead to insufficient hydraulic pressure (AT, DCT, CVT) or insufficient lubrication of gear meshing (MT). Manifesting as noticeable stuttering and impact during gear shifting, or requiring a delay of several seconds for power response after shifting, especially during low-speed upshifts.
2025-12-04
How often is the oil in the car gearbox replaced?
There is no unified standard for the replacement cycle of automotive transmission oil, which mainly depends on the type of transmission and the requirements of the vehicle manufacturer, and is also affected by driving conditions.
2025-12-04
Common faults and maintenance points of gearbox
Common faults: gear jerking, oil leakage, abnormal noise, gear failure, often caused by gear wear, aging clutch plates, hydraulic oil deterioration, etc.
2025-12-04
Message
We will contact you within one business day. Please note your email address.
Fast navigation
Connection
Whatsapp/Tel: +86-13832705650,+86-15227502601
E-mail: yuchi@cntoptransmission.com
Add: Qianxiuluo Village, Xingbieying Township, Hejian City, Cangzhou City, Hebei Province, China
